DeVilbiss 1025DS review: 10 LPM specs and price

2 min read By HHZ Editorial Next review

The DeVilbiss 1025DS is a 10 LPM home oxygen concentrator (2–10 LPM, 20 psi outlet) with an oxygen sensing alarm at 82% or below. It weighs 42 lb, uses 639 W on average and is rated under 59 dBA. Purity is 87–96% on the 120 V model, falling to 87–92% at 10 LPM. It costs $1,399 (13 Oct 2026). This review is based on the manual, not hands-on testing.

How we reviewed this: HHZ didn’t test this device hands-on. This review is written from the manufacturer’s user manual and published specifications, linked below, plus a U.S. retail price checked on 13 October 2026. We don’t report comfort, noise or reliability impressions we haven’t measured.

Key specs

SpecDeVilbiss 1025DSSource
Price (U.S.)$1,399The CPAP Shop
Flow2–10 LPM continuous1025DS manual Rev B
Outlet pressure20.0 ±1.0 psiManual
Purity (120 V model)87–96%Manual
Purity at 2 LPM / 10 LPM87–94% / 87–92%Manual
Power639 W average at 120 VManual
Weight42 lbManual
Size24.5 x 13.5 x 12 inManual
Sound pressureUnder 59 dBA (3 and 10 LPM)Manual
Sound powerUnder 69 dBAManual
Oxygen alarm (OSD)82% or below; very low under 60%Manual
Auxiliary portMax 6 LPM when filling a bottleManual
Operating temperature41–95°FManual
Service life5 yearsManual
Warranty3 years from factory shipment to original purchaser; filters excludedManual

Performance caveats in the manual

The manual says flow and purity may be affected above 5,000 ft, above 95°F or above 93% relative humidity. If you live at altitude, read oxygen at altitude and ask your supplier.

Running cost

At 639 W for 24 hours, that’s about 15.3 kWh a day, or roughly 466 kWh in a 30.4-day month. See our electricity cost guide.

Compared with the NewLife Intensity 10

DeVilbiss 1025DSNewLife Intensity 10
Price$1,399$1,299
Weight42 lb58 lb
Power639 W average600 W
Outlet pressure20 psi20 psig
Two patientsNoYes (dual flow)
Altitude caveatAbove 5,000 ftRated to 10,000 ft

Maintenance

Clean the filter door vents every 7 days, per the manual.

Verdict

From the documents, the 1025DS is a lighter 10 LPM concentrator with a built-in oxygen alarm and bottle-filling support. Its purity drops toward the low end at high flow, and the manual flags reduced performance above 5,000 ft, so high-altitude users may prefer the Intensity 10.

Related: 5 LPM vs 10 LPM, oxygen concentrator buyer’s guide, CAIRE Companion 5 review, switching Medicare oxygen suppliers.

See also: Albuquerque altitude guide.

Frequently asked questions

What flow does the DeVilbiss 1025DS deliver?
2 to 10 LPM continuous flow, with an outlet pressure of 20.0 ±1.0 psi. Purity on the 120 V model is 87–96%; the manual's flow table lists 87–92% at 10 LPM and 87–94% at 2 LPM.
Does the 1025DS have an oxygen alarm?
Yes. Its oxygen sensing device (OSD) alerts at 82% oxygen or below, with a very-low alert under 60%.
Can the 1025DS fill oxygen bottles?
The manual describes an auxiliary port and says flow should be no more than 6 LPM when filling a bottle from it. Follow your supplier's instructions.
How much power does the 1025DS use?
639 W on average at 120 V, per the manual.
What's the DeVilbiss 1025DS warranty?
Three years from factory shipment to the original purchaser, which is usually the equipment provider rather than you. Filters aren't covered.